Liquid Samplers

Inline Liquid Sampler

The Inline Liquid Sampler offers a method of obtaining a grab sample directly from a small process stream or a large slip stream.  It is a true zero dead volume sampler and is fully purged with a carrier gas during the sample cycle.  The sampler allows full time purge of the sample vial in between samples to insure an inert atmosphere in the sample vial when the sample is taken.

Pressure:  3000 psig

Temperature:  450 °F

Inline Liquid Sampler
Flow Diagram

For a cleaner print out at higher resolution, download
the Inline Liquid Sampler Flow Diagram in
Adobe Acrobat format.

If you do not have Adobe Acrobat Reader, download it here.

Two & Three Way Liquid Samplers

The Three Way Liquid Sampler offers a method of obtaining a grab sample from a bypass loop on a process stream.

The Two Way Liquid Sampler provides a simple way of obtaining a sample from lines without a process return, such as tank farms.

Pressure:  2500 psig

Temperature -65°F - 300°F

If you do not have Adobe Acrobat Reader, download it here.

	Representative, Emission free sampling
	Available with Process Blow Back
	All non-wetted parts are Stainless Steel
	Wetted parts available in 316 SS, Monel, Hastelloy, Teflon
	Inexpensive replaceable needles
	Cabinet mounting available
	Temperature control of enclosure and / or sample available
	Available with or without Carbon Filters
	Custom designs available

Typical Units

Contact Us

With specific needs or questions

  samplers@sampling-systems.com

---

Sampling Systems
PO Box 1179 / Angleton TX 77516 * 708 N Main St. / Sweeny TX 77480 USA
Phone: (979) 647-1070 / Fax: (979) 647-1072
E-mail: samplers@sampling-systems.com